D O O R R E S O U R C E S HANDLING, INSTALLATION & FINISHING
Door 4362 (3/6 x 7/6), Side Lites 4702, Transom 6701, all shown with Square Sticking in Quarter Sawn White Oak with Custom Decorative Glass See page 91
Wood stile and rail doors are a reflection of quality and good taste. To ensure you obtain the maximum enjoyment and utility of your door, follow the guidelines detailed below. Failure to follow the guidelines below will invalidate our Limited Warranty. It will be the discretion of Rogue Valley Door or its representative to approve or reject any claim due to poor handling, application, installation or finishing. Door Handling Guide 1. Handle all doors with clean gloves and equipment. 2. Avoid dragging doors across one another or across other surfaces. Avoid leaning at a steep angle. 3. Store on a level surface in a dry, well-ventilated building. Avoid stacking on end. 4. Cover doors to keep clean, but allow air circulation. 5. Doors should not be subject to abnormal heat, dryness, or humidity for prolonged periods. Avoid sudden changes such as forced heat to dry out a building. 6. Deliver doors in a clean truck and under cover from wet weather. 7. Deliver doors to building site only after plaster, stucco, and/or cement is dry. 8. If the doors are to be stored for long periods or on the job site, the entire door including the top and bottom edges must be sealed in order to prevent undue moisture absorption. 9. Doors shall not be exposed to excessive moisture (above 55% RH), excessive heat (90 degrees F), and dryness (30%RH).
156
Powered by FlippingBook