HBG Full Line Catalog

HB&G’s number one goal is finding ways that we can save you time and make your life easier.

Parallel Dimensions*

Column Parallel Size Dim. 18x18 60" 18x20 84" 18x22 49" 18x24 73" 18x26 97" 20x10 0" 20x12 0" 20x14 0" 20x16 4" 20x18 28" 20x20 52" 20x22 76" 20x24 100" 22x16 45" 22x18 69" 22x20 93" 22x22 53" 22x24 77" 22x26 101" 24x12 21" 24x14 45" 24x16 69" 24x18 93" 24x20 75" 24x22 99" 24x24 123" 24x26 77" 24x28 101" 24x30 125" 28x20 20" 28x22 44" 28x24 68" 28x26 92" 28x28 116" 30x20 92" 30x22 116" 30x24 140" 30x26 75" 30x28 99" 30x30 123"

Column Parallel Size Dim. 6x4 0" 6x6 8" 6x8 32" 8x5 12" 8x6 24" 8x8 32" 8x9 28" 8x10 40" 10x6 8" 10x8 32" 10x9 28" 10x10 40" 10x12 48" 12x6 8" 12x8 32" 12x9 20" 12x10 32" 12x12 48" 12x14 16" 12x16 40" 12x18 73" 14x8 32" 14x9 12" 14x10 24" 14x12 48" 14x14 27" 14x16 51" 14x18 75" 16x8 16" 16x10 40" 16x12 29" 16x14 53" 16x16 36" 16x18 60" 16x20 84" 18x8 0" 18x10 16" 18x12 40" 18x14 48" 18x16 36"

Poly Tuscan Cap PermaFlashing

PermaCast ® PermaFlashing and Installation Kit The PermaCast® flashing with Plumb-Fit® and installation kit is available in selected Tuscan cap and base sets.* This innovation will not only save time but will keep the elements out of the column and secure the top and bottom of the column. *Not available in Tuscan cap and base sets for Craftsman, No-taper, PermaLite ®, andWood columns. Split Column Assembly and Flange Kits HB&G offers a split kit and a split kit with flange option with an improved

MMA adhesive. These kits can be purchased separately. MMA adhesive must be stored in a climate-controlled environment.

A0262080 Installation Kit for Beveled Cap and Base and Roughsawn Trim Kits

17040 Standard Installation Kit Entasis - Parallel Dimensions are used to specify where the column begins to taper. These dimensions use length from the bottom of the column shaft to the point where the taper begins. This is necessary to determine how much a column can be shortened before the base begins to fit loosely. Filler and caulking may be used to fill the gap between the base and shaft if it is necessary to shorten the column beyond the parallel dimension.

Column Size

Bottom Diameter

6x4

5 3 / 8 "

18x8

17 1 / 4 "

20x10 20x12 20x14

18 11 / 16 " 18 5 / 16 "

19 1 / 4 "

*For Tapered Round Columns

14

Powered by