Many of the Forgent Series products are available with impact performance packages to meet even the strictest building code requirements. Kolbe offers impact performance products to improve air, water and structural ratings. These impact ratings provide enhanced window and door strength without any modifications to the product. All Forgent Series impact rated products are glazed with structural silicone. All certifications apply to both All Glastra and Glastra/ Wood products.
Air Tested to PSF
Performance Class and Grade
Design Pressure PA (PSF)
Max Width
Max Height
Kolbe Performance
Product Configuration
Water Tested to PA (PSF)
Product
FL # TDI #
Positive Negative Inches (MM) Inches (MM)
Forgent Series Impact Ratings Forgent Complementary Sliding Door Impact 4
Two Panel
1.57 360 Pa (7.52 psf)
LC-PG50 SD +2400 Pa (50.13 psf) LC-PG40 SD +1920 Pa (40.10 psf) LC-PG60 AP +2880 Pa (60.15 psf) LC-PG65 C +3120 Pa (65.16 psf) LC-PG55 C +3120 Pa (65.16 psf)
-2400 Pa (50.13 psf) -1920 Pa (40.10 psf) -2880 Pa (60.15 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -3120 Pa (65.16 psf) -2640 Pa (55.14 psf) -3120 Pa (65.16 psf) -2400 Pa (50.13 psf)
96 2438 96 2438 22641
In Process In Process In Process In Process In Process In Process In Process In Process In Process In Process In Process In Process In Process In Process
Forgent Complementary Sliding Door
Impact 4
Four Panel
1.57 290 Pa (6.06 psf)
168 4267 96 2438 22641
Crank-Out Awning
Impact 4
Single
1.57 440 Pa (9.19 psf)
47.5 1206 47.5 1206 22241
Crank-Out Casement
Impact 4
Single
1.57 470 Pa (9.82 psf)
35.5 902 71.5 1816 22235
Casement Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf)
35.5 902 71.5 1816 22235
Casement Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf) CW-PG55 FW +3120 Pa (65.16 psf)
59.5 1511 95.5 2426 22235
Casement Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf)
LC-PG65 FW +3120 Pa (65.16 psf) LC-PG65 FW +3120 Pa (65.16 psf) LC-PG65 FW +3120 Pa (65.16 psf) LC-PG65 FW +3120 Pa (65.16 psf) LC-PG65 FW +3120 Pa (65.16 psf)
28.5 724 71.5 1816 22242
Casement Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf)
55.5 1410 85.5 2172 22242
Casement Picture
Impact 4
Single
1.57 470 Pa (9.82 psf)
71.5 1816 71.5 1816 22242
Double Hung Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf)
59.5 1511 85.5 2172 22242
Double Hung Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf)
28.5 724 71.5 1816 22242
Double Hung Direct Set
Impact 4
Single
1.57 470 Pa (9.82 psf) CW-PG55 FW +3120 Pa (65.16 psf)
59.5 1511 95.5 2426 22242
Double Hung
Impact 4
Single
1.57 470 Pa (9.82 psf)
LC-PG55 H +2640 Pa (55.14 psf) LC-PG65 FW +3120 Pa (65.16 psf) LC-PG50 HS +2400 Pa (50.13 psf)
44 1118 75 1905 22655
Double Hung Studio
Impact 4
Single
1.57 470 Pa (9.82 psf)
60 1524 80 2032 22242
Sliding Window
Impact 4
Single
1.57 360 Pa (7.52 psf)
71.5 1816 59.5 1511 22656 Submitted
1-1/2" Mull Intersecting
HVHZ
–
1.57 70 Pa (10.65 psf)
LC-PG70
*
*
–
–
–
– 21044
–
Half-inch Reinforced Mullion (No T-Mulls)
HVHZ
–
1.57 70 Pa (10.65 psf)
LC-PG60
*
*
–
–
–
– 21044
–
* Allowable mulled assembly pressure shall be the lesser of the pressure based on mullion span & load width, and that specified for the individual window units.
NOTE: For specific product information, including configuration and maximum size tested, please visit kolbewindows.com/solutions/impact-resistance .
Forgent ® Series 65
Powered by FlippingBook