P ROV E N P E R FORMANC E & QUA L I T Y
TRILENNIUM ® STRONG.
There is no comparison.
Don't Just Take Our Word For It. With Trilennium, strength, quality and reliable performance are more than just marketing fluff. We're committed to ensuring this performance through rigorous testing, competitive warranties and meticulous quality inspections to deliver a product you can proudly stand behind.
Trilennium Testing Results
Top Quality. Our Promise. When you order your handsets through Endura Products, we ensure that you receive the proper product to drive your system, regardless of your application. Our Quality Assurance group individually inspects each handle set for proper design, function, handing and finish. If an issue does arise, we're standing by with spare parts on hand to repair or replace, saving you time and headaches.
ASTM E 2395
GRADE 10
GRADE 20
GRADE 30
Test 1, At Lock, Static Load
300 lbf
500 lbf
800 lbf
Test 2, At Lock and Corner, Static Loads
300 lbf
500 lbf
800 lbf
Test 3, At Lock, Impact Loads
300 ft-lb x 2
300 ft-lb x 2
300 ft-lb x 2
Specification ASTM E 2395 measures the resistance of the door assembly to forced entry by an intruder. The higher the grade the unit passes, the greater the unit’s strength, security and performance. Trilennium ® Multi-Point Series 3000 and 3070 surpassed Grade 30 in dynamic entry testing.
Endura's new TriLast ™ finish is available in Victorian Bronze and Satin Nickel for Eclipse, Pinnacle and Eclipse Grip handsets. This finish passes the toughest BHMA standards for protection against corrosion in coastal and other environments, and is now backed by our new TriLast ™ Limited Lifetime Warranty.
The information contained in this document is the confidential and proprietary information and trade secrets of Endura Products, Inc. Any disclosure, use or dissemination of such information without the express written permission of Endura Products, Inc. is strictly prohibited. Endura Products, Inc. also owns any and all intellectual property rights embodied in such information, including patent rights, copyrights, and trademark rights, and no license of any intellectual property right is intended, nor should any license be implied, as a result of the receipt of this document. Testing was based on ASTM E 2395 Standard Test Methods for Security of Swinging Door Assemblies. Door units were assembled then installed in a 2x rough opening according to normal procedures. A 100 lb weight was hung from above the unit, with its impact point positioned at the lock block. The weight was pulled back a specific distance for each load level, then allowed to swing into the door unit towards the panel open direction. The weight impacted the door two times at each load level. If, after impact, the door stayed closed, or if holes created were small enough to prevent reaching in to unlock the door, then the unit passed the test. Single, inswing door units were used for all locks, Panels used were 8' Plastpro, 6-panel, smooth fiberglass. Frames were 4-9/16” finger jointed eastern white pine.
8817 W. Market St., Colfax, NC 27235 1.800.334.2006 www.enduraproducts.com
Effective: 4.16 TriDist-16 U.S. Patents: 5,857,291; 6,491,326; 7,753,418; 8,182,002; Canadian Patents: 2,562,430; 2,605,002.
Powered by FlippingBook