Schlage Residential Architectural Guide Catalog

BE Series and FE Series residential keypad deadbolts and locksets

Keypad entry lock

FE595 Series Camelot x Accent lever

FE595 Series Plymouth x Plymouth knob

FE595 Series Camelot x Georgian knob

FE595 Series Plymouth x Flair lever

FE575 Series Plymouth x Plymouth Knob

FE575 Series Camelot x Accent lever

FE575 Series Plymouth x Elan lever

General: n  Minimum 5 1 / 2 " (140mm) center-to-center distance between cross bore holes n  9-volt battery included with average three-year battery life n  Silicone rubber, wear-resistant buttons with LED backlight n  ANSI A 156.5-2001 Grade 2 auxiliary locks, ANSI A 156.2-2003 bored locks and latches

FE595 - Keypad Entry with Flex-Lock n F lex-locking, switch between unlocked or automatic re-locking

n U nlocked by valid user code from outside

Inside knob or lever always unlocked K ey can be used to unlock as back-up

n

n

FE575 - Keypad Entry with Auto-Lock n  Auto-locking, automatically re-locks after 5 seconds

 FCC Part 15

n

 CE mark

n

n  Unlocked by valid user code from outside

n  BE365 and FE285 available UL Listed (box pack only)

 Inside knob or lever always unlocked  Key can be used to unlock as back-up

n

n

Finishes BE and FE Series 605 608 609 613 618 619 620 622 625 626 716 BE365 Camelot • • • • • • • • BE365 Plymouth • • • • • • • • FE595 Camelot x Accent • • • • • • • • FE595 Camelot x Georgian • • • FE595 Plymouth x Flair • • • • • • • • FE595 Plymouth x Plymouth • FE575 Camelot x Accent • • • • • • • • FE575 Plymouth x Flair • • • • • • • • FE575 Plymouth x Elan • FE575 Plymouth x Jazz • FE575 Plymouth x Plymouth •

Standard features / configurations Warranty

Limited lifetime mechanical and finish warranty, 3 year electronics warranty 1" x 2 1/4" (25mm x 57mm) latch with radius corner faceplate, 7/8" (22mm) housing diameter, 1/2" (13mm) throw spring latch with square corner and circular drive-in faceplates 1" x 2 1/4" (25mm x 57mm) radius corner faceplate, 1" (25mm) housing diameter, requires 1" (25mm) edge bore, 1" (25mm) throw with square corner and circular drive-in faceplates 1 5/8" x 2 1/4" (41mm x 57mm), square and radius corner, full lip 2 3/4" (70mm), round corner, latch strike, metal strike reinforcer 5-pin solid brass, keyed 5-pin, C keyway, keyed different (KD)

Keypad lock latch

Keypad deadbolt latch

Latch strikes

Deadbolt strike

Cylinder

7

Powered by