REN I N . COM
9
Replace End Stops
A) Remove the existing door stops from each end of the track. B) Replace with the End Stops provided. C) Position End Stops so the door is in the desired open and closed position and tighten the set screws with Allen Key. Note: The New End Stops should work on most standard 78 3/4˝ and 96˝ track.
A
B
C
10
Set the Catch Block
A) Have a second person stay on the handle side of the door (Front) while you move the door to the closed position. B) Hold the Catch Block onto the bottom of the track Note: Place outside of the new end stop with the Catch Block set screws facing toward the back. C) Have the other person push the handle in and rotate it downward to raise the rod into the catch block. D) Tighten the set screws. Note: Ensure the handle seats in the locked position, and has to be pushed inward to actuate the rod up or down.
11
12
A
A) Snap the cover onto the handle assembly ensuring the emergency key slots face the side of the rod.
A) Test the
emergency key so you are familiar with how it operates. B) Store the key at the back of the track, between the track and the catch block as shown.
B
Emergency Key Slots
| 5 Installation Instructions
Powered by FlippingBook