Lite Kit Technical Information Fire-Rated Lite Kits: Lite Kits installed in fire-rated doors require fire-rated glass and glazing tape. Impact Safety Rated Glass requirements : IBC requires all individual glazed areas in swinging doors to be impact safety-rated to comply with the CPSC 16CFR 1201 Category I or II. Accessibility Standard Compliance: ADA Standards for Accessible Design, requires that the bottom of the glass panel in a vision lite be located 43" maximum above the floor. An exception for vision lites with the lowest part more than 66" above the floor are not required to comply. Louver Technical Information Steel louvers over 46" wide and aluminum louvers over 36" wide must be furnished as two louver cores mounted in one louver frame with a mullion in between. All Louvers over 64" or more in height will be furnished as two lou- ver cores mounted in one frame with a mullion in between.
LEED Green Building
The LEED (Leadership in Energy and Environmental Design) Green Building Rating System ® is a national standard for developing high-performance, sustainable buildings developed by the U. S. Green Building Council. Our current LEED letter containing LEED qualification information for all our products is available at www.ngp.com Environmental Product Declarations (EPD) prepared and certified by an Independent Laboratory based on Life Cycle Assessments (LCA) of our products may be viewed on our website www.ngp.com
Health Product Declarations (HPD) may be viewed on our website www.ngp.com
National Guard Products sustainability report may be viewed on our website www.ngp.com
Contact us regarding our end of use product recycling program.
Buy American Requirements Buy American Act
Over 99% of our products are produced in the United States as a domestic construction material, as defined in the Buy American Act (BAA) of March 1933 and amended by the Buy American Act of 1988 and FAR 52.225-9. A Buy American certificate may be obtained on our website www.ngp.com Federal American Recovery and Reinvestment Act More than 99% of our products qualify as manufactured products produced in the United States as manufactured goods, as defined in OMB Guidance (176.140; 176.70(a) (2) (ii); 176.160, complying with the Federal American Recovery Reinvestment Act, ARRA-2009. Contact us for a Buy America ARRA certificate for your project. Buy America More than 99% of our products comply with Buy America Requirements of 49 U.S.C. 5323(j)(1), and the applicable regulations in 49 CFR part 661. Contact us for a Certificate of Compliance for your project.
Components of unknown origin are considered to have been produced or manufactured outside the United States.
L 3
NATIONAL GUARD PRODUCTS, INC.
Phone 800-647-7874 Fax 800-255-7874
orders@ngp.com quotes@ngp.com
www.ngp.com
Powered by FlippingBook