Prestige Metal Stair Catalog

CUSTOM RAILINGS

All unpainted and unassembled stainless steel (SS) products are available in 48 hours. All stainless steel products are available painted.

GLASS CLAMPS

2 7/16 ”

2 11/16 ”

1 15/16 ”

2 1/8 ”

RADIUS 1 1/16 ’ ’

1 1/8 ’ ’

1’ ’

1 3/4 ”

1 3/4 ”

1 9/16 ”

1 1/2 ”

RADIUS 1 1/16 ’ ’

SVR LARL Flat bottom

SVR MEDL Flat bottom

SVR MED

SVR LAR

• Available glass thickness : • LARGE : 8 mm, 10 mm, 12 mm. • MEDIUM : 6 mm, 8 mm, 10 mm • Rubber 10 mm included • Rubber 6, 8 and 12 mm are optional • Other thickness: Please mention it on your order (additional charge applies). • Location of the pin: see image opposite

• Available glass thickness : • LARGE : 8 mm, 10 mm, 12 mm. • MEDIUM : 6 mm, 8 mm, 10 mm • Rubber 10 mm included • Rubber 6, 8 and 12 mm are optional • Other thickness: Please mention it on your order (additional charge applies). • Location of the pin: see image opposite

LAR :1 13/16 ” MED :1 3/8 ”

LARL :1 7/8 ” MEDL :1 3/8 ”

LAR : 19/32” MED : 5/8”

LARL : 5/8” MEDL : 5/8”

GLASS CLAMPS

BAR HOLDERS & BARS

19mm

19mm

SVR 150LF

SVR 150LA

STR 050

STR 050L

• Maximum length: 236 1 / 4 ’’. Can be pre-cut. TGR 050

• Fixed side-mounted glass clamp • Glass thickness : • 8 mm, 10 mm, 12 mm and 16 mm • Note that there is a slight difference in diameter between the two pieces.

• Use with the posts of the PTC series . • Installation upon request.

• Adjustable side-mounted glass clamp • Glass thickness : • 8 mm, 10 mm, 12 mm and 16 mm • Length between the wall and the glass • min : 1 1/4’’ • max : 2’’

• Use with the posts of the PTR series. • Installation upon request.

CABLE HOLDERS & CABLE

3/16”

SCR 018L • Stainless steel side-mounted support • Us with the posts of the PTC series. • For 3/16” cable • Installation upon request.

CBR 018

SCR 018 • Use with the posts of the PTR series. • For 3/16” cable • Installation upon request.

3/16” (5 mm). Can be pre-cut.

• Not available painted. • Also available in one roll of 328’ ( CBR 018R )

Photos and drawings are indicative. The installer is responsible for checking the current regulations, in their area, with their local building inspector.

Powered by