Radius | Elevation Charts
Elliptical Units to match Casements
Elliptical Units | Casement
4'-2 1/2" 4'-0 1/2" 43 1/4"
5'-2 1/2" 5'-0 1/2" 55 1/4"
6'-2 1/2" 6'-0 1/2" 67 1/4"
U.D.
7'-8 1/2" 7'-6 1/2" 85 1/4"
8'-2 1/2" 8'-0 1/2" 91 1/4"
R.O.
G.S.
EHKW2
EHKX2
EHKW3
WEHKX3
WEHKW4
Elliptical Units to match Double Hungs
Elliptical Units | Double Hung
3'-9 3/8" 3'-7 1/2" 37 1/2"
5'-9 3/8" 5'-7 1/2" 61 1/2"
5'-1 3/8" 4'-11 1/2" 53 1/2"
6'-5 3/8" 6'-3 1/2" 69 1/2"
U.D.
7'-1 3/8" 6'-11 1/2" 77 1/2"
4'-5 3/8" 4'-3 1/2" 45 1/2"
7'-9 3/8" 7'-7 1/2" 85 1/2"
R.O.
G.S.
WEH16-2DH WEH20-2DH WEH24-2DH
WEH40-2DH
EH32-2DH
EH28-2DH
WEH36-2DH
10'-6 7/8" 10'-5" 119"
9'-6 7/8" 9'-5" 107 1/8"
6'-6 7/8" 6'-5" 71"
5'-6 7/8" 5'-5" 59"
7'-6 7/8" 7'-5" 83"
8'-6 7/8" 8'-5" 95"
U.D.
R.O.
G.S.
WEH24-3DH
WEH28-3DH
WEH32-3DH
WEH36-3DH
WEH16-3DH
WEH20-3DH
U.D. Elliptical Units to match Garden-Aires 5'-2 1/4" 5'-0 1/2" 54 1/2" R.O. 6'-2 1/4" 6'-0 1/2" 66 1/2" 6'-8 1/4" 6'-6 1/2" 72 1/2" G.S.
Elliptical Units | Garden-Aire Sliding Patio Door
Elliptical Units Inswing Patio Door
8'-2 1/4" 8'-0 1/2" 90 1/2"
5'-1 7/16" 4'-11 11/16" 53 11/16"
6'-1 7/16" 5'-11 11/16" 65 11/16"
U.D.
R.O.
G.S.
WEHG80
WEHG50
WEHG60
WEHG66
EHS511
WEHS411
Elliptical Units | Inswing Entrance Door Elliptical Units to match Inswing Doors
Elliptical Units Outswing Patio Door Outswing Patio door
6'-4 3/16" 6'-2 7/16" 68 9/16"
5'-8 3/16" 5'-6 7/16" 60 9/16"
4'-4 3/16" 4'-2 7/16" 44 9/16"
5'-4 3/16" 5'-2 7/16" 56 9/16"
U.D.
R.O.
G.S.
5'-2 5/8" 5'-0 5/8" 53 15/16"
6'-2 5/8" 6'-0 5/8" 65 15/16"
U.D.
WEHXD60
WEHXD54
EHXD50
WEHXD40
R.O.
G.S.
WEHS411
EHS511
Elliptical Units | Outswing Entrance Door
Outswing Elliptical
5'-9 3/8" 5'-7 3/8" 60 5/8"
4'-5 3/8" 4'-3 3/8" 44 5/8"
5'-5 3/8" 5'-3 3/8" 56 5/8"
6'-5 3/8" 6'-3 3/8" 68 5/8"
U.D.
R.O.
G.S.
WEHXD40
WEHXD60
EHXD50
WEHXD54
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Radius units are sash set as standard. Direct set units are available. Glass sizes differ for direct set units. Contact your supplier for details. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Divided lites are optional. Divided lite pattern options are shown on pg. 116. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 120
Powered by FlippingBook