Inswing Entrance Doors Elevation Charts
Inswing Doors - Rectangular Transoms
Inswing Entrance Doors | Rectangular Transoms
2'-9 7/8" 2'-7 7/8" 25 7/8"
2'-11 7/8" 2'-9 7/8" 27 7/8"
5'-4 7/16" 5'-2 7/16" 56 7/16"
6'-4 7/16" 6'-2 7/16" 68 7/16"
5'-8 7/16" 5'-6 7/16" 60 7/16"
3'-3 7/8" 3'-1 7/8" 31 7/8"
2'-3 7/8" 2'-1 7/8" 19 7/8"
4'-4 7/16" 4'-2 7/16" 44 7/16"
U.D.
R.O.
G.S.
2010
2610
2810
3010
4010
5010
5410
6010
2014
2614
2814
3014
4014
5014
5414
6014
2016
2616
2816
3016
4016
5016
5416
6016
2018
2618
2818
3018
4018
5018
5418
6018
2020
2620
2820
3020
4020
5020
5420
6020
2026
2626
2826
3026
4026
5026
5426
6026
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Rectangular transom units are sash set as standard. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Divided lite configurations must be specified when ordering. Specify inswing when ordering. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 158
Powered by FlippingBook