Outswing Entrance Doors Elevation Charts
Inswing Sidelite Sash Designs
Outswing Entrance Door Sidelites
Outswing Entrance Door Sidelite Panel Designs
U.D. Outswing Sidlelites 1'-4 3/4" 1'-2 3/4" 7 5/8" R.O. G.S.* 1'-6 3/4" 1'-4 3/4" 9 5/8"
1'-10 3/4" 1'-8 3/4" 13 5/8"
1'-8 3/4" 1'-6 3/4" 11 5/8"
KK5110 KK5110-30 KK5110-24
Sash Design#:
KK510
KK515
WXD1068S
WXD1268S
WXD1468S
WXD1668S
Full Lite
1W5H Pattern
1 Lite over 1 Panel, 8" Cross Rail at 40"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 30"
1 Lite over 1 Panel, 4-5/8" Cross Rail at 24"
WXD1070S
WXD1270S
WXD1470S
WXD1670S
WXD1080S
WXD1280S
WXD1480S
WXD1680S
* Glass size widths are shown for one-lite glass. For TDL glass sizes, contact your Kolbe window and door supplier. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Sidelite sash design KK515 has TDL or PDL in the configuration shown. If a different configuration pattern is needed, specify sash design KK510 or KK5110 and the type of configuration desired. Not all panel designs are available in all sizes.
Not all panel designs are shown; see your local Kolbe distributor for further assistance. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 168
Powered by FlippingBook