Outswing Patio Doors Elevation Charts
Outswing Patio Doors
Operation is viewed from the interior. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size Glass size widths are shown per panel for one-lite glass. For TDL glass sizes contact your supplier.
2'-9 11/32" 2'-7 11/32" 24 3/4" 6'-2 5/8" 6'-0 5/8" 66" H.S. Transoms for Outswing Patio Door Sizes U.D. R.O. G.S. 3'-3 11/32" 3'-1 11/32" 30 3/4" 5'-2 5/8" 5'-0 5/8" 54" Outswing Patio D ors | Rectangular Transoms
SPWT2610
SPWT3010
SPWT41110
SPWT51110
SPWT2614
SPWT3014
SPWT41114
SPWT51114
SPWT2616
SPWT3016
SPWT41116
SPWT51116
SPWT2618
SPWT3018
SPWT241118
SPWT51118
SPWT51120
SPWT2620
SPWT3020
SPWT41120
SPWT51126
SPWT2626
SPWT3026
SPWT41126
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Rectangular transom units are sash set as standard.
The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Transom dimensions shown are for units stacked above active doors; dimensions for transoms stacked above stationary doors may vary. Divided lites are optional. The configuration shown for a single panel is typical for each panel in the unit. Divided lite configurations must be specified when ordering. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 172
Powered by FlippingBook