Casements - “W” Series
Casements | “W” Series (2'- 0" Wide)
6'-2 1/2" 6'-0 1/2" 19 1/4" 17 13/16"
8'-2 1/2" 8'-0 1/2" 19 1/4" 17 13/16"
12'-2 1/2" 12'-0 1/2" 19 1/4" 17 13/16"
10'-2 1/2" 10'-0 1/2" 19 1/4" 17 13/16"
4'-2 1/2" 4'-0 1/2" 19 1/4" 17 13/16"
2'-2 1/2" 2'-0 1/2" 19 1/4" 17 13/16"
U.D.
R.O.
G.S.
G.S.**
W12†
W22†
W32†
W42†
W52†
W62†
W126†
W226†
W326†
W426†
W626†
W526†
W13
W23
W33
W43
W53
W63
W136
W236
W336
W436
W536
W636
W14
W24
W34
W44
W54
W64
W146
W246
W346
W446
W546
W646
W15
W25
W35
W45
W55
W65
W156
W256
W356
W456
W556
W656
W16
W26
W36
W46
W56
W66
** Glass size for push-out casements † Push-out units are only available with single-point hardware U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configurations shown for single sash are typical for each sash of mulled units.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 19
Powered by FlippingBook