Casements | Elevation Charts
Casements - Rectangular Transoms & Studio Units
Casements | Rectangular Transoms & Picture Units
4'-2 1/2" 4'-0 1/2" 43 1/4" 41 13/16"
3'-2 1/2" 3'-0 1/2" 31 1/4" 29 13/16"
3'-6 1/2" 3'-4 1/2" 35 1/4" 33 13/16"
4'-8 1/2" 4'-6 1/2" 49 1/4" 47 13/16"
5'-2 1/2" 5'-0 1/2" 55 1/4" 53 13/16"
6'-2 1/2" 6'-0 1/2" 67 1/4" 65 13/16"
2'-10 1/2" 2'-8 1/2" 27 1/4" 25 13/16"
2'-8 1/2" 2'-6 1/2" 25 1/4" 23 13/16"
2'-2 1/2" 2'-0 1/2" 19 1/4" 17 13/16"
1'-10 1/2" 1'-8 1/2" 15 1/4" 13 13/16"
1'-6 1/2" 1'-4 1/2" 11 1/4" 9 13/16"
U.D.
R.O.
G.S.
G.S.*
E114S
N214P
W214P
4614P
N314P
W314P
C114S
W114S
X114S
N114S
S114S
E116S
N216P
W216P
4616P
N316P
W316P
C116S
S116S N116S W116S X116S
N218P
W218P
4618P
N318P
E118S
W318P
C118S
W118S
X118S
S118S
N118S
** Glass size for units to match operating push-out casements U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
N22P
W22P
4620P
N32P
W32P
N226P
W226P
4626P
N326P
W326P
N23P
W23P
4630P
N33P
W33P
N236P
W236P
4636P
N336P
W336P
N24P
W24P
4640P
N34P
W34P
4646P
W346P
N246P
W246P
N346P
N25P
W25P
4650P
N35P
W35P
N256P
4656P
N356P
W356P
W256P
4660P
N36P
N26P
W26P
W36P
NOTE: All measurements are nominal. Elevation charts are not to scale. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Divided lites are optional. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 24
Powered by FlippingBook