Casements - “N” Series 30° Bay Windows
Casements | “N” Series 30° Bay Windows
12 7/16"
UNIT PROJECTION:
5'-1 5/8" 4'-9 3/4" 15 1/4"
6'-9 5/8" 6'-5 3/4" 15 1/4"
6'-9 5/8" 6'-5 3/4" 15 1/4" | 35 1/4" | 15 1/4"
8'-5 5/8" 8'-1 3/4" 15 1/4" | 55 1/4" | 15 1/4"
8'-5 5/8" 8'-1 3/4" 15 1/4"
U.D.
R.O.
G.S.
N13-33P-13
N13-13-13
N13-23-13
N13-33-13
N13-23P-13
N136-336P-136
N136-136-136
N136-236-136
N136-336-136
N136-236P-136
N14-34P-14
N14-24-14
N14-14-14
N14-24P-14
N14-34-14
N146-146-146
N146-246-146
N146-246P-146
N146-346-146
N146-346P-146
N15-15-15
N15-25-15
N15-25P-15
N15-35-15
N15-35P-15
N156-156-156
N156-256P-156
N156-356P-156
N156-256-156
N156-356-156
N16-36P-16
N16-16-16
N16-26-16
N16-26P-16
N16-36-16
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional.
If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/16" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 31
Powered by FlippingBook