Casements - “N” Series 45° Bay Windows
Casements | “N” Series 45° Bay Windows
17 1/2"
UNIT PROJECTION:
8'-0 9/16" 7'-7 5/8" 15 1/4" | 55 1/4" | 15 1/4"
8'-0 9/16" 7'-7 5/8" 15 1/4"
6'-4 9/16" 5'-11 5/8" 15 1/4"
U.D.
6'-4 9/16" 5'-11 5/8" 15 1/4" | 35 1/4" | 15 1/4"
4'-8 9/16" 4'-3 5/8" 15 1/4"
R.O.
G.S.
N13-23P-13
N13-23-13
N13-13-13
N13-33P-13
N13-33-13
N136-236P-136
N136-336-136
N136-136-136
N136-236-136
N136-336P-136
N14-34P-14
N14-24P-14
N14-34-14
N14-14-14
N14-24-14
N146-246P-146
N146-346-146
N146-246-146
N146-146-146
N146-346P-146
N15-35P-15
N15-25P-15
N15-15-15
N15-25-15
N15-35-15
N156-356P-156
N156-256P-156
N156-356-156
N156-256-156
N156-156-156
N16-26P-16
N16-16-16
N16-26-16
N16-36P-16
N16-36-16
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. Follow chart down from top row and across from left column to determine divided lites configurations.
If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/16" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 35
Powered by FlippingBook