Segment Head Casements - “E” Series Segment Head Casements “E” Series
9'-2 1/2" 9'-0 1/2" 31 1/4" 29 13/16"
6'-2 1/2" 6'-0 1/2" 31 1/4" 29 13/16"
3'-2 1/2" 3'-0 1/2" 31 1/4" 29 13/16"
U.D.
R.O.
G.S.*
G.S.**
5
10
14
E33-SEG §
E13-SEG
E23-SEG
5
10
14
E136-SEG †
E236-SEG †
E336-SEG †
5
10
14
E34-SEG †
E14-SEG †
E24-SEG †
5
10
14
E346-SEG †
E146-SEG †
E246-SEG †
5
10
14
E25-SEG †
E35-SEG †
E15-SEG †
5
10
14
E156-SEG †
E256-SEG †
E356-SEG †
5
10
14
E16-SEG †
E26-SEG †
E36-SEG †
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved. ** Glass size for push-out casements. † Units meet most national emergency escape and rescue requirements. § Only available as stationary units. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configurations shown for single sash are typical for each sash of mulled units.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 43
Powered by FlippingBook