Half-Circle Top Casements
Half-Circle Top Casements
2'-10 1/2" 2'-8 1/2" 27 1/4 " 25 13/16 "
1'-10 1/2" 1'-8 1/2" 15 1/4" 13 13/16 "
1'-6 1/2" 1'-4 1/2" 11 1/4" 9 13/16 "
2'-2 1/2" 2'-0 1/2" 19 1/4" 17 13/16 "
2'-6 1/2" 2'-4 1/2" 23 1/4" 21 13/16 "
2'-8 1/2" 2'-6 1/2" 25 1/4" 23 13/16 "
3'-2 1/2" 3'-0 1/2" 31 1/4" 29 13/16 "
U.D.
R.O.
G.S.*
G.S.**
S126-HC†N126-HC†W126-HC† L126-HC† X126-HC†
C126-HC†
E126-HC†
X13-HC
C13-HC
N13-HC
W13-HC
L13-HC
S13-HC
E13-HC
N136-HC
W136-HC
L136-HC
X136-HC
S136-HC
C136-HC
E136-HC
N14-HC
W14-HC
L14-HC
X14-HC***
C14-HC***
S14-HC
E14-HC***
N146-HC
W146-HC
L146-HC
X146-HC***
S146-HC
C146-HC***
E146-HC***
C15-HC***
N15-HC
W15-HC
L15-HC
X15-HC***
S15-HC
E15-HC***
N156-HC
W156-HC
L156-HC
X156-HC***
S156-HC
C156-HC***
E156-HC***
N16-HC
W16-HC
L16-HC
X16-HC***
S16-HC
C16-HC***
E16-HC***
* Approximate glass sizes are given; true glass sizes vary depending on the radius involved. ** Glass size for push-out casements. *** Units meet most national emergency escape and rescue requirements when ordered as venting units.
† Push-out units are only available with single-point hardware. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Units are stationary as standard, however, some may be ordered as venting units. Contact your local dealer for details. Divided lites are optional.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 45
Powered by FlippingBook