Double Hungs | Elevation Charts
Double Hungs – Rectangular Transoms
Double Hungs | Rectangular Transoms
3'-3 7/8" 3'-2" 3'-0" 32"
3'-7 7/8" 3'-6" 3'-4" 36"
2'-3 7/8" 2'-2" 2'-0" 20"
2'-7 7/8" 2'-6" 2'-4" 24"
1'-11 7/8" 1'-10" 1'-8" 16"
2'-11 7/8" 2'-10" 2'-8" 28"
3'-11 7/8" 3'-10" 3'-8" 40"
U.D.
R.O.
S.O.
G.S.
DHT3606
DHT4006
DHT3206
DHT1606 DHT2006 DHT2406 DHT2806
DHT4010
DHT3610
DHT3210
DHT1610 DHT2010 DHT2410 DHT2810
DHT1612 DHT2012 DHT2412 DHT2812 DHT3212
DHT3612
DHT4012
DHT3214
DHT1614 DHT2014 DHT2414 DHT2814
DHT3614
DHT4014
DHT3618
DHT4018
DHT3218
DHT1618 DHT2018 DHT2418 DHT2818
DHT3624
DHT4024
DHT1624 DHT2024 DHT2424 DHT2824 DHT3224
U.D. = Unit Dimension • R.O. = Rough Opening • S.O. = Sash Opening • G.S. = Glass Size
NOTE: All measurements are nominal. These dimensions apply only for transoms with flat sills. Contact your supplier for dimensions of units with beveled sills. Elevation charts are not to scale. Transom units are only available with a 1-3/4" sash. The units shown are stand-alone units. Adjustments may be required when stacking over other units; adjustments will be made in the factory. Divided lites are optional. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. The side jambs of double hung units extend above the head jamb; additional space for the rough opening height may be necessary. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 84
Powered by FlippingBook