TM
4
Attach Both T Brackets
A) Affix both T brackets ( 1 upper and 2 lower) using the 1" screws provided. Note: Ensure the brackets are centered on the door.
1
2
Front of Door
6
5 A) Insert the square
Square rod through T bracket
A
A) Insert the
8 engagement pin block assembly into the bottom end of the rod, with the pin facing the side of the door the handle will be affixed to (as shown in step 8). Note: Angle the rod slightly so you can access the screw holes and affix with the screws provided. A) Position the handle assembly on the door, ensuring the handle is in the lowered position (as shown) and the engagement pin is located in the slot of the handle. B) Affix the handle assembly to the predrilled holes in the door using the screws provided.
rod down through the lower T bracket on a slight angle. are at the bottom of the square rod, are facing the door side edge.
Front of Door
B) Ensure the holes
Front of Door
Edge
B
7
A) Raise the rod up
Front of Door
through the upper T bracket.
Note: Rod should touch the track.
Handle is in lowered position
4 | Installation Instructions
Powered by FlippingBook