National Guard Lites and Louvers Catalog

National Guard Lite Kits and Louvers Catalog

Lites & Louvers

CANADIAN GEESE - The Canadian goose is the most recognizable goose in North America. Its black and white head and characteristic “honking” call make the Canadian goose an easily identifiable bird. They are known to take up residence in urban environments and to discontinue migrating if conditions are acceptable.

LITE KITS & LOUVERS

Lites & Louvers Product Index:

Lite Kits

Page

Aluminum False Mullion Low Profile

L16A

L4-L7

Round Security

L22

L17-L21 L13-L15

Security Grille Sound-rated Square profile Stainless Steel Thru-bolted

L8-L12

L16 L12

Louvers

Page

Aluminum Dark Room Fire-rated Security Grille

L25 L28 L26 L27

Steel

L23-L24

Lite Kits & Louvers

Numerical Index:

Model

Lite Kits

Page

L-CVFM-SS L-FRA100

Stainless Steel

L16

Low Profile

L-FRA100-ALUM L-FRA100-RD L-FRA100-SP L-FRA100 STC L-FRA100-SP STC L-GLF100-SP L-GLF100-SP-TB L-GLF100-TB L-GLF100

Aluminum Lite Kit Round Low Profile

L16A

L22

Low Profile Special Glass or Door Thickness

L6-L7

Sound Rated Low Profile

L5 L5 L8

Sound Rated Low Profile Special Glass or Door Thickness

Square Profile

Square Profile Special Glass or Door Thickness Thru-Bolted Special Glass or Door Thickness

L10-L11

L12 L12

Thru-Bolted Security Grille

L-SG100

L13, L15 L14-L15

L-SG100-TB

Security Grille Thru-Bolted Security Grille with Privacy Panel Security Glass with Privacy Panel Security Grille with Privacy Panel Security Glass with Privacy Panel Security Glass

L-VGLF-MD, MDL

L19 L20 L18 L21 L17

L-VGLF-OG L-VGLF-PZ L-VGLF-SF L-VGLF-WD

Options: G2-G24

False Mullion

Model

Louvers

Page

L-75-A, B, BF

Dark Room Aluminum

L29 L25 L24 L23 L27 L26 L28 L28

L-A700-A, B, BF, C L-700-A, B, BF, C

Steel - Adjustable 1-3/8" to 2-1/4" doors

L-700RX L-1800 L-1900 L-VRSG-2 L-VRSG-3

Steel Self-Attaching Adjustable Blade Fire-rated Fusible Link

Security Grille

Security Grille (Both sides)

L-Clips

H.M. Door Reinforcement

L30

Lite Kit and Louver Fasteners

L30

L 1

Rating Symbols Legend POSITIVE PRESSURE - CERTIFIED by UL to ANSI/UL10C; complies with IBC, NFPA 80 and NFPA 252 for use on Hollow metal fire doors rated up to 3 hours and Wood fire doors rated up to 90 minutes (some ratings vary as noted). CERTIFIED by UL to CAN/ULC-S104 and ANSI/UL10B; complies with NFPA 80 and NFPA 252 for use on Hollow metal fire doors rated up to 3 hours and Wood fire doors rated up to 90 minutes (some ratings vary as noted). Materials Lite Kits are available in Cold Rolled Steel, Galvanneal Steel, and Stainless Steel (type 304). Louvers are available in Cold Rolled Steel, Galvanneal Steel, and Aluminum Alloy 6063-T5. Powder Coat Finish The standard finish for each product is indicated on the catalog page and in the price list and will be provided unless one of the following optional finishes is indicated. See www.ngp.com for color chart: (GPZ) Gray Primer (BPR) Beige Primer (matches Steelcraft) (DKB) Dark Bronze (PTY) Putty (matches Anemostat Beige) (T) Tan (CAB) California Bronze (matches Anemostat) (GBL) Gloss Black (W) White (MBL) Matte Black (B) Brass (Gold) (TBL) Textured Black (WB) Walnut Brown (matches Timely Browntone) (ASL) Aluminum Silver (MW) Magnolia White (matches Timely Western White) Custom colors and color matching available – Consult customer service for details resistance on steel products with this sealer applied to the metal prior to the powder coat finish. Salt Spray Test Results: Steel lite kits with NGP’s corrosion resistant sealer and powder coat finish withstood 1,248 hours without failing. This is 2-1/2 times longer than the protection provided by powder coating only. Zinc Electro-Plating Corrosion Resistant Sealer: A polymeric green seal (non-chrome) corrosion resistance extender is applied under all NGP powder coat finishes. Laboratory salt spray tests prove a dramatic increase in corrosion Available on steel lite kits and louvers for extra corrosion resistance; recommended for exterior, wet areas, and coastal salt air locations. Zinc electro-plating will be applied prior to the powder coat finish. Specify on order “Zinc EL-Plate” and powder coat color desired. Not available on insect screen. How to Order Example Quantity Model# Finish Cut-out Size Options (width x height) 10 L-FRA100-SP DKB 24" x 30" for 1" thick glass 10C

L 2

Lite Kit Technical Information Fire-Rated Lite Kits: Lite Kits installed in fire-rated doors require fire-rated glass and glazing tape. Impact Safety Rated Glass requirements : IBC requires all individual glazed areas in swinging doors to be impact safety-rated to comply with the CPSC 16CFR 1201 Category I or II. Accessibility Standard Compliance: ADA Standards for Accessible Design, requires that the bottom of the glass panel in a vision lite be located 43" maximum above the floor. An exception for vision lites with the lowest part more than 66" above the floor are not required to comply. Louver Technical Information Steel louvers over 46" wide and aluminum louvers over 36" wide must be furnished as two louver cores mounted in one louver frame with a mullion in between. All Louvers over 64" or more in height will be furnished as two lou- ver cores mounted in one frame with a mullion in between.

LEED Green Building

The LEED (Leadership in Energy and Environmental Design) Green Building Rating System ® is a national standard for developing high-performance, sustainable buildings developed by the U. S. Green Building Council. Our current LEED letter containing LEED qualification information for all our products is available at www.ngp.com Environmental Product Declarations (EPD) prepared and certified by an Independent Laboratory based on Life Cycle Assessments (LCA) of our products may be viewed on our website www.ngp.com

Health Product Declarations (HPD) may be viewed on our website www.ngp.com

National Guard Products sustainability report may be viewed on our website www.ngp.com

Buy American Requirements Buy American Act

Over 99% of our products are produced in the United States as a domestic construction material, as defined in the Buy American Act (BAA) of March 1933 and amended by the Buy American Act of 1988 and FAR 52.225-9. A Buy American certificate may be obtained on our website www.ngp.com Federal American Recovery and Reinvestment Act More than 99% of our products qualify as manufactured products produced in the United States as manufactured goods, as defined in OMB Guidance (176.140; 176.70(a) (2) (ii); 176.160, complying with the Federal American Recovery Reinvestment Act, ARRA-2009. Contact us for a Buy America ARRA certificate for your project. Buy America More than 99% of our products comply with Buy America Requirements of 49 U.S.C. 5323(j)(1), and the applicable regulations in 49 CFR part 661. Contact us for a Certificate of Compliance for your project.

Components of unknown origin are considered to have been produced or manufactured outside the United States.

L 3

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-FRA100 Low Profile Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4" or 5/16" Glass • Welded reinforcing clips at corners • Counter-sunk mounting screw-holes • #8 x 1-3/4" Phillips head SMS • Available in uneven and fractional sizes • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2 • Torx Security Screws • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick • 18 ga. cold rolled steel • Mitered and welded corners

Hollow Metal or Wood Door

3/8" Glazing Space 3/16", 1/4" or 5/16" GLASS

10C

1/2"

Hollow Metal or Wood Door

3/32"

1 3/4"

Designed for use on 1-3/4" thick doors manufac- tured within door industry tolerance of +/- 1/16".

L 4

L-FRA100 STC & L-FRA100-SP STC Low Profile Sound Rated Lite Kit Option - Suffix “STC” Silicone acoustical seal applied to reduce sound transmission

silicone acoustical seal (factory applied)

10C

Acoustical Testing performed at Architectural Testing, Inc. to: ASTM E 90, Standard Test Method for Laboratory Measurement of Airborne Sound Transmission Loss of Building Partitions. ASTM E 413, Classification for Rating Sound Insulation. ASTM E 1338, Standard Classification for Rating Outdoor-Indoor Sound Attenuation. ASTM E 2235, Standard Test Method for Determination of Decay Rates for Use in Sound Insulation Test Methods.

STC Ratings: • SuperLite I-W • Pyran Platinum F • Pyran Platinum L • SuperLite I-20 • SuperLite X-90

STC 28 STC 31 STC 36 STC 28 STC 38 STC 28 STC 31 STC 35 STC 29 STC 34 STC 40

• Wired

• Tempered - 1/4"

• Insulated Tempered - 1" • Polycarbonate 1/4" • Polycarbonate 1/2" • SuperLite II-XL (45 min.)

L 5

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-FRA100-SP Low Profile Lite Kit for Variable Door and/or Glass Thickness

Hollow Metal or Wood Door

• 18 ga. cold rolled steel • Mitered and welded corners

• Welded reinforcing clips at corners • Counter-sunk mounting screw-holes • #8 Phillips head SMS

• Available in uneven and fractional sizes • Gray Primer (GPZ) powder coat finish Required Information • Specify glass thickness on order • Specify door thickness on order if other than 1-3/4"

Available Options • Powder coat color options - see page L2 • Torx Security Screws • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick

10C

1/2"

Hollow Metal or Wood Door

3/32"

L 6

L-FRA100-SP Glass and Door Combinations Details shown are for 1-3/4" door thickness. Only configurations shown are available Some applications require thicker glazing tape

1-3/4"

DOOR GLASS

1-3/4" - 1/2" 1-3/4" - 7/16" 1-3/4" - 9/16" 1-3/4" - 5/8" 1-3/8" - 1/4"

1-3/4" - 3/8"

3/32"

1/2"

3/4"

13/16"

3/4"

13/16"

7/16"

1-3/4" DOOR GLASS 1-3/4" - 3/4" 1-3/8" - 3/8"

1-3/4"

DOOR GLASS

1-3/4" - 7/8" 1-3/4" - 1" 1-3/8" - 1/2"

3/32"

7/8"

3/4"

7/16"

1-1/8"

L 7

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-GLF100 Square Profile Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4", or 5/16" Glass

HOLLOW METAL DOOR

• 18 ga. cold rolled steel • Mitered and welded corners

1 1/4"

• Welded reinforcing clips at corners • Countersunk mounting screw-holes • #6 x 1-3/4" Phillips Truss Head SMS • Gray Primer (GPZ) powder coat finish

3/8" Glazing Space

Available Options • Powder coat color options - see page L2 • False mullion bars (page L9) • Torx Security Screws • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick

3/16", 1/4" or 5/16" GLASS

10C

7/8"

1 1/4"

WOOD DOOR

not to scale

3/16"

1 3/4"

3/16"

Designed for use on 1-3/4" thick doors manufac- tured within door industry tolerance of +/- 1/16".

L 8

False Mullion Lite Kits

• 1" wide steel channel • Fits L-GLF100, L-GLF100-SP, L-GLF100-TB, L-GLF100-SP-TB, L-SG100, L-SG100-TB • Mullion bars welded into both sides of Lite Kit • Finished to match Lite Kit Available Options * Zinc electro-plating To Order Specify Lite Kit x G# (i.e.: G2, G3, G4 etc.) If other than as illustrated, provide detail & suffix G-SP

10C

G2 (1 Bar)

G3 (2 Bars)

G4 (2 Bars)

G6 (3 Bars)

G12 (5 Bars)

G10 (5 Bars)

G8 (4 Bars)

G9 (4 Bars)

G15 (6 Bars)

G21 (8 Bars)

G18 (7 Bars)

G24 (9 Bars)

L 9

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-GLF100-SP Square Profile Lite Kit for Variable Door and/or Glass Thickness

HOLLOW METAL DOOR

• 18 ga. cold rolled steel • Mitered and welded corners

• Welded reinforcing clips at corners • Countersunk mounting screw-holes • #6 Phillips Truss Head SMS • Gray Primer (GPZ) powder coat finish Required Information • Specify glass thickness on order • Specify door thickness on order if other than 1-3/4" Available Options • Powder coat color options - see page L2 • False mullion bars (Page L9) • Torx Security Screws • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick lead

1-1/4"

3/8" to 1-1/4" GLASS

10C

1-1/4"

WOOD DOOR

not to scale

3/16"

1-3/8" - 2-1/4"

L 10

L-GLF100-SP and L-GLF100-SP-TB Glass and Door Combinations Details shown are for 1-3/4" door thickness Only Configurations shown are available Some applications require thicker glazing tape Thru-bolts available for 1-3/4" thick doors only

1-3/4"

DOOR GLASS 1-3/4" - 1/2" 1-3/4" - 9/16" 1-3/4" - 5/8" 1-3/8" - 1/4" 2" - 7/8" 2-1/4" - 1"

DOOR GLASS 2” - 1/4” 2" - 7/16" 2" - 1/2" 2-1/4" - 3/4"

3/16"

7/8"

3/4"

1/2"

7/8"

3/8"

1-3/4"

DOOR GLASS 1-3/4" - 1" 1" - 1/4"

DOOR GLASS 1-3/4" - 3/4"

3/16"

3/8"

7/8"

1/2"

1-1/8"

1-3/4"

DOOR GLASS 1-3/4" - 1-1/8"

DOOR GLASS 1-3/4" - 1-1/4" 1" - 1/2"

3/16"

3/8"

1-3/8"

3/8"

1/2"

1-1/4"

L 11

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-GLF100-TB Thru-bolted Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4", or 5/16" Glass

• 18 ga. cold rolled steel • Mitered and welded corners

• Welded reinforcing clips at corners • Countersunk mounting screw-holes • Thru-bolts for 1-3/4" door • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2 • False Mullion bars (Page L9) • Torx Security Thru-bolts • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick

METAL DOOR

1 1/4"

3/8" to 1 1/4" Glass

10C

L-GLF100-SP-TB Thru-bolted Lite Kit for 1-3/4" Thick Doors and Variable Glass Thickness 3/8" to 1-1/4" • 18 ga. cold rolled steel • Mitered and welded corners • Welded reinforcing clips at corners • Countersunk mounting screw-holes • Thru-bolts for 1-3/4" door • Gray Primer (GPZ) Powder coat finish Required Information: Specify Glass thickness Available Options • Powder coat color options - see page L2 • False Mullion bars (Page L9)

1 1/4"

WOOD DOOR

not to scale

• Torx Security Thru-bolts • Galvanneal - A40 steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick

1 3/4"

3/16"

Designed for 1-3/4" thick Doors manufactured within door industry tolerance of +/- 1/16"

10C

L 12

L-SG100 Self Attaching Security Grille Lite Kit for Variable Door and/or Glass Thickness

• 18 ga. cold rolled steel • 16 ga. steel 3/4" x 3/4" security grille welded in both sides • Mitered and welded corners

HOLLOW METAL DOOR

• Welded reinforcing clips at corners • Countersunk mounting screw-holes • #6 Phillips truss head screws • Gray Primer (GPZ) powder coat finish Required Information • Specify glass thickness on order • Specify door thickness on order if other than 1-3/4" (See page L15 for available sizes) Available Options • Powder coat color options - see page L2 • False mullion bars (Page L9) • Torx security screws • Galvanneal - A40 Steel • Zinc electro-plating • Glass & glazing tape - See Glass Section • Lead lining - .030" thick

1-1/4"

16 ga. STEEL 3/4" X 3/4" SECURITY GRILLE

1/8" to 1-1/8" Glass

*up to 90 minutes.

10C

1-1/4"

WOOD DOOR

not to scale

3/16"

1-3/8" - 2-1/4"

L 13

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

• 18 ga. cold rolled steel • 16 ga. steel 3/4" x 3/4" security grille welded in both sides • Mitered and welded corners L-SG100-TB Thru-Bolted Security Grille Lite Kit for 1-3/4" Thick Doors and Variable Glass Thickness

HOLLOW METAL DOOR

• Welded reinforcing clips at corners • Countersunk mounting screw-holes • Thru-bolts for 1-3/4" door • Gray Primer (GPZ) powder coat finish Required Information; • Specify glass thickness on order (See page L15 for available sizes) Available Options • Powder coat color options - see page L2 • False mullion bars (Page L9) • Torx security Thru-bolts • Galvanneal - A40 Steel • Zinc electro-plating • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick

1 1/4"

16 ga. STEEL 3/4" X 3/4" SECURITY GRILLE

1/8" to 1 1/8" Glass

*up to 90 minutes.

10C

1 1/4"

WOOD DOOR

not to scale

1 3/4"

3/16"

L 14

L-SG100 and L-SG100-TB Glass and Door Combinations Details shown are for 1-3/4" door thickness Only Configurations shown are available Some applications require thicker glazing tape Thru-bolts available for 1-3/4" thick doors only

1-3/4"

DOOR GLASS 1-3/4" - 3/16" 1-3/4" - 1/4" 1-3/4" - 5/16" 1-3/4" - 1/2" 2" - 3/4"

DOOR GLASS 1-3/4" - 1/8 2" - 3/8" 2-1/4" - 5/8"

3/16"

Security Grille

1/4"

7/8"

5/8"

1/2"

7/8"

1-3/4"

DOOR GLASS 1-3/4" - 3/4" 1-3/4" - 7/8"

DOOR GLASS 1-3/4" - 5/8"

3/16"

Security Grille

3/4"

7/8"

1/2"

1 "

3/8"

1/2"

1-3/4"

DOOR GLASS 1-3/4" - 1 "

DOOR GLASS 1-3/4" - 1-1/8" 1" - 3/8"

3/16"

Security Grille

1/2"

3/8"

1-1/8"

1-1/4"

L 15

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-CVFM-SS Stainless Steel Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4", or 5/16" Glass • 18 ga. Type 304 stainless steel • Mitered and welded corners • Countersunk mounting screw-holes • Available in uneven and fractional sizes • #8 x 1-3/4" Phillips head SMS • #4 satin finish Available Options • Powder coat finish - see page L2 • Torx Security Screws • Glass & Glazing tape - See Glass Section • Lead Lining - .030" thick

Hollow Metal or Wood Door

10C

1/2"

Hollow Metal or Wood Door

3/32"

not to scale

L 16

L-FRA100-ALUM Aluminum Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4" or 5/16" Glass • Welded reinforcing clips at corners • Counter-sunk mounting screw-holes • #8 x 1-3/4" Phillips head SMS • Available in uneven and fractional sizes • Aluminum Silver (ASL) powder coat finish Available Options • Powder coat color options - see page L2 • Torx Security Screws • Glass & Glazing tape - See Glass Section • Lead lining - .030" thick • .050 extruded aluminum • Mitered and welded corners

Hollow Metal or Wood Door

3/8" Glazing Space 3/16", 1/4" or 5/16" GLASS

NOT FIRE-RATED

1/2"

Hollow Metal or Wood Door

5/32"

1 3/4"

Designed for use on 1-3/4" thick doors manufac- tured within door industry tolerance of +/- 1/16".

L 16A

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

Page Intentionally Blank

L-VGLF-WD (9" X 5") Security Lite Kit

• 18 ga. cold rolled steel • Mitered and welded corners • 1-3/4" hollow metal or wood doors • 1/2" thick high impact polycarbonate plastic • 18 ga. steel hinged panel • No exposed fasteners on outside of door • Low-profile frame • 6" x 2" exposed glass size • #8 x 1" Oval head TEK screws • 2.8 oz. Silicone sealant included • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

1/2"

11/16"

3/4"

• Torx security screws • Zinc electro-plating

18 GA. HINGED STEEL PANEL

1/2" POLYCARBONATE PLASTIC

1 15/16"

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

not to scale

L 17

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-VGLF-PZ (9" X 9") Security Lite Kit

1 3/4" METAL/WOOD DOOR

1/2"

11/16"

3/4"

• 18 ga. cold rolled steel • Mitered and welded corners • For 1-3/4" hollow metal or wood doors • 1/2" thick high impact polycarbonate plastic • No exposed fasteners on outside of door • Low-profile frame • 6" x 6" exposed glass size • #8 x 1" Oval head TEK screws • 2.8 oz. Silicone sealant included • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2

1/2" Polycarbonate Plastic

• Torx security screws • Zinc electro-plating

1 15/16"

1 3/4" METAL/WOOD DOOR

not to scale

L 18

L-VGLF-MD (9" X 9") L-VGLF-MDL (12" X 12") Security Lite Kit

• 18 ga. cold rolled steel • Mitered and welded corners • For 1-3/4" hollow metal or wood doors • 1/2" thick high impact polycarbonate plastic • 16 ga. steel 3/4" x 3/4" security grille • 18 ga. steel hinged panel • No exposed fasteners on outside of door • Low-profile frame • 6" x 6" exposed glass size on L-VGLF-MD • 9" x 9" exposed glass size on L-VGLF-MDL • #8 x 1" Oval head TEK screws • 2.8 oz. Silicone sealant included • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

1/2"

11/16"

3/4"

18 GA.HINGED STEEL PANEL

• Torx security screws • Zinc electro-plating

16 Ga. STEEL 3/4" X 3/4" SECURITY GRILLE

1/2" POLYCARBONATE PLASTIC

1 15/16"

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

not to scale

L 19

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-VGLF-OG (9" X 9") Security Lite Kit

• 18 ga. cold rolled steel • Mitered and welded corners • For 1-3/4" hollow metal or wood doors • 1/2" thick high impact polycarbonate plastic • 18 ga. steel hinged panel • No exposed fasteners on outside of door • Low-profile frame • 6" x 6" exposed glass size • #8 x 1" Oval head TEK screws • 2.8 oz. Silicone sealant included • Gray Primer (GPZ) powder coat finish

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

1/2"

11/16"

3/4"

Available Options • Powder coat color options - see page L2

18 GA.HINGED STEEL PANEL

• Torx security screws • Zinc electro-plating

1/2" POLYCARBONATE PLASTIC

1 15/16"

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

not to scale

L 20

L-VGLF-SF (11” X 11”) Security Lite Kit

• 18 ga. cold rolled steel • Mitered and welded corners • For 1-3/4" hollow metal or wood doors • 1/4" thick high impact polycarbonate plastic • 16 ga. steel 3/4" x 3/4" security grille • 18 ga. steel hinged panel with bolt latch • No exposed fasteners on outside of door • Low-profile frame • 8" x 8" exposed glass size • #8 x 1" Oval head TEK screws • 2.8 oz. Silicone sealant included • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

1/2"

11/16"

3/4"

18 GA.HINGED STEEL PANEL

• Torx security screws • Zinc electro-plating

16 Ga. STEEL 3/4" X 3/4" SECURITY GRILLE

1/4" POLYCARBONATE PLASTIC

1 15/16"

13/4" (44.45mm) METAL/WOOD DOOR 1 3/4" METAL/WOOD DOOR

not to scale

L 21

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-FRA-100-RD Round Lite Kit for 1-3/4" Thick Doors and 3/16", 1/4", or 5/16" Glass

• 18 ga. cold rolled steel • Countersunk mounting screw-holes • #8 x 1-3/4" Phillips head SMS • Gray Primer

HOLLOW METAL OR WOOD DOOR

Available Options • Powder coat color options - see page L2 • Torx security screws • Zinc electro-plating • Glass & Glazing tape - See Glass Section

3/8" Glazing Space

3/16", 1/4" or 5/16"

10C

GLASS

• Available in 12", 18" and 24” sizes only

1/2"

1-1/2"

HOLLOW METAL

OR WOOD DOOR

not to scale

3/32"

1 3/4"

L 22

L-700-RX No Vision Door Louver for 1-3/4" Thick Doors

• 18 ga. cold rolled steel • Mitered and welded corners • Welded reinforcing clips at corners • Inverted “V” design • Blades 24 ga. steel; hemmed edges • Counter-sunk mounting screw-holes • #8 x 3/4" Phillips head SMS • Available in uneven and fractional sizes • Free area 55% • Gray Primer (GPZ) powder coat finish Available Options • Powder coat color options - see page L2 • Thru Bolts - specify L-700-RX-TB

EXTERIOR

INTERIOR

METAL DOOR

1 1/4"

1/2"

• Aluminum Insect screen - 22 ga. 1/8" square mesh installed exterior side unless requested otherwise • Torx Security Screws • Galvanneal - A40 Steel • Zinc electro-plating (not available on insect screen)

1/2"

1 1/16"

1 1/4"

THRU BOLTS AVAILABLE UPON REQUEST

WOOD DOOR

not to scale

3/16"

1-3/4"

3/16"

undersized 1/8" for clearance

Designed for use on 1-3/4" thick doors manufac- tured within door industry tolerance of +/- 1/16".

L 23

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-700 SERIES No Vision Door and Partition Louver for 1-3/8", 1-3/4" up to 2-1/4" Thick Doors

• 20 ga. cold rolled steel frame • Mitered and welded corners • Welded reinforcing clips at corners • Inverted “V” design • Blades 24 ga. steel; hemmed edges • Counter-sunk mounting screw-holes • #8 x 3/4" Phillips head SMS • Available in uneven and fractional sizes • Gray Primer (GPZ) powder coat finish • Free area 55% Available Options • Powder coat color options - see page L2 • Thru bolts (TB) for 1-3/4" thick doors

• Aluminum Insect screen - 22 ga. 1/8" square mesh installed exterior side unless requested otherwise • Torx Security Screws • Galvanneal A40 Steel • Zinc electro-plating (not available on insect screen)

METAL DOOR

1-1/4"

3/16"

90°

1/2"

90°

1-1/16"

1/2"

1-1/16"

1-3/16"

WOOD DOOR

15/16"

Install L-700-C & L-700-A using glass stop or molding

1/8 "

1/8"

1-3/4"

L-700-C undersized 3/16" for clearance

L-700-A undersized 1/16" for clearance

L-700-B undersized 1/16" for clearance

L-700-BF undersized 1/16" for clearance

not to scale

L 24

Aluminum No Vision Door and Partition Louver for 1-3/8", 1-3/4" up to 2-1/4" Thick Doors L-A700 SERIES

• Frame .050" extruded aluminum • Blades .050" extruded aluminum • Mitered corners secured with reinforcing clips • Inverted “V” design • Counter-sunk mounting screw-holes • #8 x 3/4" Phillips head SMS • Available in uneven and fractional sizes • Aluminum Silver (ASL) powder coat finish • Free area 55% Available Options • Powder coat color options - see page L2 • For exterior use specify drainage weep holes • Thru bolts (TB) for 1-3/4" door when specified • Aluminum Insect screen - 22 ga. 1/8" square mesh installed exterior side unless requested otherwise • Torx Security Screws

METAL DOOR

1-9/16"

1/2"

90°

1-1/16"

1/2"

1-1/16"

1-3/16"

1-1/8"

WOOD DOOR

Install L-700-C & L-700-A using glass stop or molding

3/16"

1-3/4"

3/16"

not to scale

L-A700-C undersized 1/4" for clearance

L-A700-A L-A700-B

L-A700-BF

undersized 3/16" for clearance

undersized 1/16" for clearance

L 25

NATIONAL GUARD PRODUCTS, INC.

Phone 800-647-7874 Fax 800-255-7874

orders@ngp.com quotes@ngp.com

www.ngp.com

L-1900 Fire-rated Fusible Link Louver for 1-3/4" Thick Doors up to 90 minutes

• Blades close when activated by fire/heat • 18 ga. cold rolled steel frame • 18 ga. cold rolled steel adjustable “Z” blades • Mitered corners secured with reinforcing clips • Stainless Steel Spring • 165 o Fusible link • Free area 40% • #8 x 3/4" Phillips head SMS • Gray Primer (GPZ) powder coat finish Available Options

3/16"

1 3/4"

165° FUSIBLE LINK

STOP BLADE

• Aluminum insect screen - 22 ga. 1/8" square mesh installed on exterior side unless requested otherwise

• Torx Security screws • Galvanneal A40 steel

OPERATING LEVER

*up to 90 minutes

10C

Size Information: Available in whole inch increments Minimum size: 10" x 6" Maximum size: 24" x 30"

undersized 1/8" for clearance

not to scale