Inswing Entrance Doors Panel Designs
Premier Sash Designs
Inswing Entrance Door Panel Designs
KK6210
KK6233
KK108-6 KK6110-30 6 Panels 1 Lite over 1 Panel, 4-5/8" Cross Rail at 30"
KK6210-30 1 Lite over 2 Panels, 4-5/8" Cross Rail at 30"
KK6110-24 1 Lite over 1 Panel, 4-5/8" Cross Rail at 24"
KK6210-24 1 Lite over 2 Panels, 4-5/8" Cross Rail at 24"
Sash Design#:
KK610 Full Lite
KK625 2W5H Pattern
KK6110
1 Lite over 1 Panel, 8" Cross Rail at 40"
1 Lite over 2 Panels, 8" Cross Rail at 40"
1 Lite over 2 Panels, 8" Cross Rail at 40" with 3W3H Pattern
Dimension Calculations
Elevation charts provide wood unit dimensions for units with the standard 1-15/16" brickmould. Below are the calculations to determine the frame size of units with brickmould.
Width Height
1-15/16" brickmould; U.D. to F.S.
-2 1/4"
-1 1/8"
3-1/2" flat or profiled casing; U.D. to F.S. -5 3/8" 3-1/2" casing and backband; U.D. to F.S. -6 7/8"
-2 11/16" -3 7/16"
F.S. to Panel O.S.M. (1-wide, active)
-1 13/16" -2 23/32"
(1-wide, stationary)
-1 3/4"
-2 23/32"
(2-wide) (3-wide)
-2 9/16"÷2 -2 23/32" -3 5/16"÷3 -2 23/32"
Panel O.S.M. to G.S. (wood 6-8 ht.)
-8 1/8"
-11 3/32"
G.S. to D.L.O.
-1" -1" Note : Dimension calculations for sidelites and transoms may be obtained from your Kolbe dealer. Clear opening dimensions can be found on pg. 201.
F.S. = Frame Size • G.S. = Glass Size • O.S.M. = Outside Measurement D.L.O. = Daylight Opening • U.D. = Unit Dimension
NOTE: Sash design KK625 has TDL or PDL in the configuration shown. If a different configuration pattern is needed, specify sash design KK610 or KK6210 and the type of divided lite configuration desired. Not all panel designs are available in all sizes.
Not all panel designs are shown; see your local Kolbe distributor for further assistance. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 154
Powered by FlippingBook