Inswing Entrance Doors Elevation Charts
Traditional Inswing Entrance Doors
Inswing Entrance Doors
2'-9 7/8" 2'-8 1/8" 21 11/16"
3'-3 7/8" 3'-2 1/8" 27 11/16"
6'-4 7/16" 6'-2 11/16" 27 11/16"
4'-4 7/16" 4'-2 11/16" 15 11/16"
2'-3 7/8" 2'-2 1/8" 15 11/16"
2'-11 7/8" 2'-10 1/8" 23 11/16"
5'-4 7/16" 5'-2 11/16" 21 11/16"
5'-8 7/16" 5'-6 11/16" 23 11/16"
U.D.
R.O.
G.S.*
4068
5068
5468
6068
2068
2668
2868
3068
2870
6070
2070
2670
3070
4070
5070
5470
6080
2080
2880
3080
5080
5480
2680
4080
* Glass size widths are shown per panel for one-lite glass. For TDL glass sizes contact your supplier. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size
NOTE: All measurements are nominal. Elevation charts are not to scale. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 155
Powered by FlippingBook