Kolbe Heritage Series

Casements | Elevation Charts

Casements - Single Units

Casements | Single Units

1'-6 1/2" 1'-4 1/2" 11 1/4" 9 13/16"

2'-2 1/2" 2'-0 1/2" 19 1/4" 17 13/16"

2'-6 1/2" 2'-4 1/2" 23 1/4" 21 13/16"

2'-10 1/2" 2'-8 1/2" 27 1/4" 25 13/16"

2'-8 1/2" 2'-6 1/2" 25 1/4" 23 13/16"

1'-10 1/2" 1'-8 1/2" 15 1/4" 13 13/16"

3'-2 1/2" 3'-0 1/2" 31 1/4" 29 13/16"

U.D.

Dimension Calculations

R.O.

G.S.

G.S.**

Elevation charts provide wood unit dimensions for units with the standard 1-15/16" brickmould. Below are the calculations to determine the frame size of units with brickmould.

N12†

S12†

L12†

W12†

X12†

C12†

Height

-2 1/2" Width

1-15/16" brickmould; U.D. to F.S.

-2"

N126†

S126†

3-1/2" flat or profiled casing; U.D. to F.S. -5 5/8" 3-1/2" casing and backband; U.D. to F.S. -7 1/8"

W126†

X126†

L126†

C126†

-3 9/16" -4 5/16"

F.S. to Sash O.S.M. Sash O.S.M. to G.S.

-1 15/16" 1 15/16" -2 13/16" 2 13/16"

X13

L13

W13

C13

N13

S13

E13

G.S. to D.L.O.

-1"

-1"

G.S. to Screen O.S.M. U.D. to G.S. (for push-outs)

+1 9/16" +1/2" -8 11/16" -8 3/16"

N136

W136

S136

L136

X136

C136

E136*

Note : Clear opening dimensions can be found on pgs. 194-196.

F.S. = Frame Size • G.S. = Glass Size • O.S.M. = Outside Measurement D.L.O. = Daylight Opening • U.D. = Unit Dimension

X14*

L14

W14

C14*

S14

E14*

N14

S146

N146

W146

X146*

L146

C146*

E146*

L15

W15

X15*

N15

S15

E15*

C15*

L156

N156

W156

X156*

S156

E156*

C156*

N16

W16

X16*

S16

L16

E16*

C16*

* Units meet most national emergency escape and rescue requirements ** Glass size for push-out casements † Push-out units are only available with single-point hardware U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size

NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional.

Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .

Kolbe Windows & Doors 16

Powered by