Casements - “S” Series
Casements | “S” Series (1'- 4" Wide)
5'-6 1/2" 5'-4 1/2" 11 1/4" 9 13/16"
2'-10 1/2" 2'-8 1/2" 11 1/4" 9 13/16"
4'-2 1/2" 4'-0 1/2" 11 1/4" 9 13/16"
6'-10 1/2" 6'-8 1/2" 11 1/4" 9 13/16"
1'-6 1/2" 1'-4 1/2" 11 1/4" 9 13/16"
U.D.
R.O.
G.S.
G.S.**
S12† S22†
S32†
S42†
S52†
S126† S226†
S326†
S426†
S526†
S13
S23
S33
S43
S53
S136 S236
S336
S436
S536
S14
S24
S34
S44
S54
S146 S246
S346
S446
S546
S15
S25
S35
S45
S55
S156 S256
S356
S456
S556
S16
S26
S36
S46
S56
** Glass size for push-out casements † Push-out units are only available with single-point hardware U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configurations shown for single sash are typical for each sash of mulled units.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 17
Powered by FlippingBook