Inswing Patio Doors Elevation Charts
Inswing Patio Doors
Operation is viewed from the interior.
U.D. = Unit Dimension • R.O. = Rough Opening • F.S. = Frame Size G.S. = Glass Size (Glass sizes are shown per door panel for one-lite glass. For cutlite glass widths, contact your supplier). Grilles are optional. The grille configurations shown for single doors are typical for each door of mulled units. When ordering inswing entrance doors, use the product codes shown and specify stationary, hinged left or hinged right, or other operation configuration.
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The configuration shown for a single panel is typical for each panel in the unit.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 161
Powered by FlippingBook