“X” Series 45° Bay Windows
Casements | “X” Series 45° Bay Windows
24 9/16"
UNIT PROJECTION:
9'-2 11/16" 8'-9 3/4" 25 1/4"
6'-8 11/16" 6'-3 3/4" 25 1/4"
11'-8 11/16" 11'-3 3/4" 25 1/4"
U.D.
R.O.
G.S.
X13-33-13
X13-13-13
X13-23-13
X136-336-136
X136-136-136
X136-236-136
X14-34-14
X14-14-14
X14-24-14
X146-346-146
X146-146-146
X146-246-146
X15-35-15
X15-15-15
X15-25-15
X156-356-156
X156-156-156
X156-256-156
X16-36-16
X16-16-16
X16-26-16
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional.
If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/16" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 37
Powered by FlippingBook