Casements | Elevation Charts
Casements - 90° Bay Windows
Casements | 90° Bay Windows
23 1/2" UNIT PROJECTION:
6'-9 1/2" 6'-0 1/2" 67 1/4"
4'-9 1/2" 4'-0 1/2" 19 1/4"
4'-9 1/2" 4'-0 1/2" 43 1/4"
6'-9 1/2" 6'-0 1/2" 19 1/4"
U.D.
R.O.
G.S.
S13-W33-S13
S13-W23-S13 S13-W23P-S13
S13-W33P-S13
S136-W236-S136 S136-W236P-S136 S136-W336-S136
S136-W336P-S136
S14-W34P-S14
S14-W34-S14
S14-W24-S14 S14-W24P-S14
S146-W246-S146 S146-W246P-S146 S146-W346-S146
S146-W346P-S146
S15-W35-S15
S15-W35P-S15
S15-W25-S15 S15-W25P-S15
S156-W256-S156 S156-W256P-S156 S156-W356-S156
S156-W356P-S156
S16-W36P-S16
S16-W36-S16
S16-W26-S16 S16-W26P-S16
U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Only flanker sash vent on 90° bay windows. Divided lites are optional. Sizes and divided lite configurations for flanker sash can be found on the Casements - “S” Series chart on pg. 17. If the cable support system and/or insulated platforms and support brackets are not being used, other means of proper support must be used. Add 1-11/16" to the R.O. height if an insulated platform is being used. R.O.’s for bay units without head and seat boards, typically used for walk-out applications, are different. Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 38
Powered by FlippingBook