Casements | Elevation Charts
Segment Head Casements - “S” Series Segment Head Casements “S” Series
Segment Head Casements - “N” Series Segment Head Casements “N” Series
1'-6 1/2" 1'-4 1/2" 11 1/4" 9 13/16"
4'-2 1/2" 4'-0 1/2" 11 1/4" 9 13/16"
2'-10 1/2" 2'-8 1/2" 11 1/4" 9 13/16"
1'-10 1/2" 1'-8 1/2" 15 1/4" 13 13/16"
3'-6 1/2" 3'-4 1/2" 15 1/4" 13 13/16"
5'-2 1/2" 5'-0 1/2" 15 1/4" 13 13/16"
U.D.
U.D.
R.O.
R.O.
G.S.*
G.S.*
G.S.**
G.S.**
4
4
6
5
7
9
N126-SEG† N226-SEG†
N326-SEG†
S126-SEG†
S226-SEG†
S326-SEG†
4
5
4
6
7
9
S13-SEG S23-SEG
S33-SEG
N13-SEG N23-SEG
N33-SEG
4
4
5
6
7
9
N136-SEG N236-SEG
N336-SEG
S136-SEG S236-SEG
S336-SEG
4
4
5
6
7
9
S34-SEG
S14-SEG S24-SEG
N14-SEG N24-SEG
N34-SEG
4
4
5
6
7
9
S346-SEG
S146-SEG S246-SEG
N146-SEG N246-SEG
N346-SEG
4
5
4
7
6
9
S35-SEG
S15-SEG S25-SEG
N15-SEG N25-SEG
N35-SEG
4
4
5
7
6
9
S156-SEG S256-SEG
S356-SEG
N156-SEG N256-SEG
N356-SEG
4
4
5
7
6
9
S16-SEG S26-SEG
S36-SEG
N16-SEG N26-SEG
N36-SEG
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved. ** Glass size for push-out casements. † Push-out units are only available with single-point hardware. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configurations shown for single sash are typical for each sash of mulled units.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Kolbe Windows & Doors 40
Powered by FlippingBook