Segment Head Casements - “W” Series Segment Head Casements “W” Series
Segment Head Casements - “L” Series S gment Head Casements “L” Series
6'-2 1/2" 6'-0 1/2" 19 1/4" 17 13/16"
2'-2 1/2" 2'-0 1/2" 19 1/4" 17 13/16"
4'-2 1/2" 4'-0 1/2" 19 1/4" 17 13/16"
7'-2 1/2" 7'-0 1/2" 23 1/4" 21 13/16"
4'-10 1/2" 4'-8 1/2" 23 1/4" 21 13/16"
2'-6 1/2" 2'-4 1/2" 23 1/4" 21 13/16"
U.D.
U.D.
R.O.
R.O.
G.S.*
G.S.*
G.S.**
G.S.**
4
7
4
11
7
10
L126-SEG†
L226-SEG†
L326-SEG†
W126-SEG†
W226-SEG†
W326-SEG†
4
7
4
7
11
10
L13-SEG
L23-SEG
L33-SEG
W13-SEG
W23-SEG
W33-SEG
4
7
4
11
7
10
L136-SEG
L236-SEG
L336-SEG
W136-SEG W236-SEG
W336-SEG
4
7
4
7
11
10
L14-SEG
L24-SEG
L34-SEG
W14-SEG
W24-SEG
W34-SEG
4
7
7
11
4
10
L146-SEG
L246-SEG
L346-SEG
W146-SEG W246-SEG
W346-SEG
4
7
11
4
7
10
L15-SEG
L25-SEG
L35-SEG
W15-SEG
W25-SEG
W35-SEG
4
7
11
7
4
10
L156-SEG
L256-SEG
L356-SEG
W156-SEG W256-SEG
W356-SEG
4
7
4
7
11
10
W26-SEG
L16-SEG
L26-SEG
L36-SEG
W16-SEG
W36-SEG
* Approximate glass sizes per sash are given; true glass sizes vary depending on the radius involved. ** Glass size for push-out casements. † Push-out units are only available with single-point hardware. U.D. = Unit Dimension • R.O. = Rough Opening • G.S. = Glass Size (Glass sizes are shown per sash)
NOTE: All measurements are nominal. Elevation charts are not to scale. Divided lites are optional. The divided lite configurations shown for single sash are typical for each sash of mulled units.
Some installation procedures will require a larger rough opening than noted (i.e. installations utilizing our installation clips), therefore, you may need to increase the rough opening size accordingly. Rough opening gaps may be increased up to a maximum of 1/2" on all sides and still be within good practice guidelines. For rough opening recommendations, see pg. 194. Additional and the most current drawings are available at www.kolbewindows.com .
Heritage Series 41
Powered by FlippingBook